• FLUNA ANTI FOG, Coating

    Price 14.90 € VAT incl.
    ( 12.31 € VAT excl. )
    In stock.
    Brand
  • FLUNA Anti-Fog

    Fluna Anti-Fog solves one of the most annoying problems when using optics such as riflescopes, spotting scopes, and binoculars: when moving from indoors to outdoors (or from a vehicle to outside), optics can fog up and block a clear view.

    Applying Fluna Anti-Fog creates a fine protective film on the glass. The solvent-based coating is easy and economical to apply with a pump bottle and will not damage your valuable optics. Fogging caused by temperature changes is reduced, and best of all: the anti-fog effect can last from several days to weeks, depending on use and application.

    Notes

    • Areas of application: Suitable for all types of glass, especially hunting optics such as riflescopes, binoculars, and spotting scopes.

    • Duration of effect: Lasts from a few days to weeks, depending on use and area of application.

    • Recommended products: For best results, use Fluna TFT Optics Cleaner and Fluna Isopropanol before applying Fluna Anti-Fog.

    How to Use

    • Preparation – Remove coarse dirt: Remove dust and coarse dirt using a brush or compressed air.

    • Cleaning: Clean the surface with Fluna TFT Optics Cleaner to achieve a clear, streak-free glass.

    • Degreasing: Degrease the optics with Fluna Isopropanol to ensure no grease or oil residues reduce the coating’s effectiveness.

    • Application – Spraying: Spray Fluna Anti-Fog thinly and evenly onto the dry glass surface.

    • Leave to work: Allow it to sit for a few minutes so a fine film can form.

    • Aftercare – Polishing: Polish with a clean lens cloth until clear and streak-free.

    • Drying time: Let the optics dry for about 1 hour before using again.